Clarion SRQ1631R 6-1/2" 3-Way Speaker System

Clarion SRQ1631R 6-1/2" 3-Way Speaker System Reviews

Other Picture

Clarion SRQ1631R 6-1/2" 3-Way Speaker System Feature

• 280 Watts Maximum Music Power
• 6-1/2" PMI-PP Cone Woofer
• 3/4" Pure Soft Dome Mid-Range with Neodymium Magnet & 5/16" Dome Tweeter
• Grille & Mesh Included
• Powerful Strontium Magnet for Dynamic Bass Response

Clarion's SRQ1631R is a 6-1/2-inch, multi-axial three-way speaker with a pure soft-dome mid-range and tweeter. It offers 280 watts of max power handling to fill your vehicle with rich audio.

Fill your vehicle with rich audio. Click to enlarge.

Frequency response.

Speaker dimensions.

PMI-PP Cone Woofer
The diaphragm uses a newly developed hybrid material in which pearl mica are mixed with a polypropylene base material. This material allows the development of speaker cones that are lighter and more responsive, as well as highly durable and resistant to distortion. It offers a unique shimmer that makes it look as bright and beautiful as it sounds.

Water-Resistant Cones
Water-resistant cones prevent sound-quality deterioration caused by moisture. Door mounting is possible without further protection.

Rubber Surrounds
The rolled edge of the diaphragm provides superior response, while its butyl material is highly durable and moisture resistant. The result is a special rubber surround that cuts distortion and further improves linearity.

Powerful Strontium Magnet for Dynamic Bass Response
A high-conductivity magnet is used in Clarion's speaker systems to obtain an airgap magnetic flux density significantly higher than that obtained from ferrite magnets. Combining this magnet with the heat-resistant voice coil results in speakers that are able to deliver powerful playback at large inputs with improved damping while maintaining the integrity of the digital source.

Rear-Vented Pole Piece
To prevent pressure from building up inside the center cap and causing increased amplitude distortion, a vent is provided on the rear of the pole piece, resulting in completely smooth cone movement, which contributes to the open, airy sound of the speakers.

Pure Soft Dome Tweeter with Neodymium Magnet
For superb sound reproduction, Clarion's ProAudio tweeters utilizes a Dual Neodymium magnet, which boasts extremely high magnetic energy--approximately 10 times that of typical ferrite magnets. With a magnetic influx density that far surpasses conventional speakers, the neodymium magnet also reduces magnetic distortion and touts high energy efficiency.

Lead-Free Solder
Solder used in product manufacturing is lead-free to help protect the environment.

SRQ1631R Specs

• Max. Input (W): 280
• Efficiency (dB/W/m): 91
• Frequency Response (Hz): 30-35k
• Mounting Depth (inch): 2-1/4

What's in the Box
Clarion SRQ1631R 6-1/2" 3-Way Speaker System Clarion's SRQ1631R is a 6-1/2-inch, multi-axial three-way speaker with a pure soft-dome mid-range and tweeter. It offers 280 watts of max power handling to fill your vehicle with rich audio.

Visit Store Now !!

Detail Products

• Clarion SRQ6932R 6" X 9" 3-Way Speaker System
• Clarion SRQ1331R 5-1/4" 3-Way Speaker System
• Clarion Mobile Electronics CZ501 - CD/MP3/WMA/AAC Receiver with USB/Bluetooth
• Clarion SRG1021R 4" Coaxial Speaker System
• Clarion SRG1321R 5-1/4" Coaxial Speaker System

Detail Reviews

Sep 30, 2011 13:41:04

Fusion Reactor RE-CM5250 5.25-Inch 200W Component Speaker System

Fusion Reactor RE-CM5250 5.25-Inch 200W Component Speaker System Reviews

Other Picture

Reactor speakers take the sweet sound handling capabilities of Encounter to the next level. Combining quality close-tolerance polypropylene cones with silk-dome tweeters to produce better sound definition.Component Speakers feature 3-way attenuation sensitivity to control the level of tweeter output at -3dB, 0 or +3dB and small crossovers for discrete installation.Butyl rubber surround ,Polypropylene cone ,High efficiency magnet structure ,Round-wound copper voice coil ,Pressed steel basket with rubber boot ,Silk dome tweeter ,Specifications Compliance 737 (Cms ) Cone Area 9.5 (Sd) D.C. Coil Resistance 3.6 (Re) Electrical Q 0.543 (Qes) Force Factor 4.992 (Bl) Free Air Resonance 57 (Fs) Frequency Response 60Hz-22kHz Impedance 4(Nominal) Max Power 200 (Watts) Mechanical Excursion 9 (mm) Mechanical Q 2.2(Qms) Mounting Depth 56.5.mm ( 2-1/4") Mounting Diameter 118.5mm (4 11/16") RMS Power 65 (Watts) Sensitivity 88 (dB) (1W/1M) Total Loudspeaker Q 0.435 (Qts)

Visit Store Now !!

Detail Products

Detail Reviews

Sep 29, 2011 13:45:05

Lanzar OPTI5C Optidrive 600 Watt 5.25-Inch Component System

Lanzar OPTI5C Optidrive 600 Watt 5.25-Inch Component System Reviews

Other Picture

Lanzar OPTI5C Optidrive 600 Watt 5.25-Inch Component System Feature

• This Custom Kit Contains:
• One Pair OPTI55 Mid:
• 5.25 Midrange Driver
• Paper Coating Cone
• 3 Black Aluminum Voice Coil

One Pair Laminated Paper Cone Mids:5.25-Inch Midrange Driver Paper Coating Cone 3-Inch Black Aluminum Voice Coil Butyl Rubber Surround 200 Watts RMS/ 400 Watts Peak Frequency Response: 65-6KHz Impedance: 4 OhmsOne Pair Aluminum Casing Tweeter:1-Inch Titanium Dome Tweeter Neodymium Magnet Aluminum Housings Flush Mount Only Frequency Response: 1.2-25KHz Impedance: 4 OhmsOne Pair Passive Crossover Network: Two - Way passive Crossovers 12dB Octave Slope Gold Plated Connectors Fully-Protected CircuitryIncluded Accessories:Custom Grills Mounting Hardware Wiring Kit Wiring Diagram & Template

Visit Store Now !!

Detail Products

Detail Reviews

Sep 15, 2011 23:05:05

VIBE Blackair Series 6-Inch 120W RMS Component Speaker BA6-V2

VIBE Blackair Series 6-Inch 120W RMS Component Speaker BA6-V2 Reviews

Other Picture

VIBE Blackair Series 6-Inch 120W RMS Component Speaker BA6-V2 Feature

• Alloy Gasket The front gasket is made from high quality machined aluminum which is the perfect complement to the bold yellow cone design.
• Removable Fine Mesh Grill
• PU Surround
• Fiberglass Cone
• Torsion Basket

The BlackAir speakers are component speaker sets with separate crossovers and tweeters to deliver improved sound quality. Designed with speed bass in mind; the BlackAir speaker is given an extended low frequency response with high accuracy to deliver a precise, detailed sound. Alloy Gasket, the front gasket is made from high quality machined aluminum which is the perfect complement to the bold yellow cone design. Removable Fine Mesh Grill, provides extra protection to the speaker cone. PU Surround, the polyurethane surround offers fast, precise dampening of the cone keeping bass fast and delivering absolute detail with perfect precision. Fiberglass Cone, the BlackAir speakers use a striking yellow fiberglass woofer cone for excellent clarity of bass. The fiberglass keeps the sound tight, precise and controlled whilst also eliminating vibration across the cone for sharp, uncoloured sound. Torsion Basket, the torsion basket provides absolute rigidity and support for the motor and moving parts of the speaker.

Visit Store Now !!

Detail Products

Detail Reviews

Sep 13, 2011 09:34:04

Fusion Reactor RE-CM650 6.5-Inch 260W Component Speaker System

Fusion Reactor RE-CM650 6.5-Inch 260W Component Speaker System Reviews

Other Picture

Reactor speakers take the sweet sound handling capabilities of Encounter to the next level. Combining quality close-tolerance polypropylene cones with silk-dome tweeters to produce better sound definition.Component Speakers feature 3-way attenuation sensitivity to control the level of tweeter output at -3dB, 0 or +3dB and small crossovers for discrete installation.Butyl rubber surround ,Polypropylene cone ,High efficiency magnet structure, Round-wound copper voice coil ,Pressed steel basket with rubber boot ,Silk dome tweeter Specifications Compliance 732 Cone Area (Cms)11.3 D.C. Coil Resistance (Sd) Electrical Q 3.6 (Re) 0.61(Qes) Force Factor 4.897 (Bl) Free Air Resonance 53 (Fs) Frequency Response 55Hz-22kHz Impedance 4 (Nominal) Max Power 260 Watts) Mechanical Excursion 10(mm) Mechanical Q 3.47(Qms) Mounting Depth 65mm (2 9/16") Mounting Diameter 131mm (5 3/16") RMS Power 85 (Watts) Sensitivity 88 (dB) (1W/1M) Total Loudspeaker 0.519 Q (Qts)

Visit Store Now !!

Detail Products

Detail Reviews

Sep 11, 2011 22:24:03

Absolute BLS-5703 Blast Series 5" x 7" 3 Way Car Speakers 640 Watts Max Power

Absolute BLS-5703 Blast Series 5" x 7" 3 Way Car Speakers 640 Watts Max Power Reviews

Other Picture

Absolute BLS-5703 Blast Series 5" x 7" 3 Way Car Speakers 640 Watts Max Power Feature

• 5" x 7" 3 Way Car Speaker
• 640 Watts Max Power
• 8 Oz Magnet Structure
• 80 Watts
• 30mm Dome Tweeter

Absolute Blast Series BLS-5703 5" x 7" 3 Way Car Speaker 640 Watts Max Power 6.5 Oz Magnet Structure 80 Watts 30mm Dome Midrange Tweeter Frequency Response 65Hz 18 KHz Sensitivity 90 dB Impedance 4 Ohms

Visit Store Now !!

Detail Products

Detail Reviews

Sep 10, 2011 07:19:05

Package: Brand New Mb Quart Pvi216 6.5" 2-way Component / Convertible Coaxial Car Speakers + Pair of Brand New Mb Quart Fta169 6x9" 3 Way Car Stereo Speakers

Package: Brand New Mb Quart Pvi216 6.5" 2-way Component / Convertible Coaxial Car Speakers + Pair of Brand New Mb Quart Fta169 6x9" 3 Way Car Stereo Speakers Reviews

Other Picture

Package: Brand New Mb Quart Pvi216 6.5" 2-way Component / Convertible Coaxial Car Speakers + Pair of Brand New Mb Quart Fta169 6x9" 3 Way Car Stereo Speakers Feature

• Peak Power: 360 watts per set / 180 watts each
• Peak Power Per Pair: 280 watts
• Three-level tweeter attenuator with rotary switch (0, 1, 3, 5 dB)
• MB Quart FTA169 3 way speakers

Package: Brand New MB Quart PVI216 6.5" 2-WAY Component / Convertible Coaxial Car Speakers + Pair Of Brand New MB Quart FTA169 6x9" 3 Way car stereo speakers Features: 6-1/2" Premium Series 2-Way Component Speakers System Peak Power Per Pair: 280 watts RMS Power Per Pair: 140 watts RMS Power Each: 70 watts Peak Power Each: 140 watts Sensitivity: 87 dB Polypropylene cone woofer Rubber surround 1.5" Titanium "Widesphere" tweeters with neodymium magnets Magnet system with silver lacquered metal cover for additional cooling and protection Gold-plated connection terminals for the best possible signal transfer Limitless mounting possibilities with new and unique FleXX Mount system for Premium Performance-crossovers Three-level tweeter attenuator with rotary switch (0, 1, 3, 5 dB) Bi-wiring and bi-amping capable Crossover filter (2900 Hz, 6/12 dB/octave) 4 ohms impedance 1" Voice coil Top-mount depth: 2-1/2" Diameter: 1.6" / 6.5"(40mm / 16cm) MB Quart FTA169 3 way speakers Peak Power: 360 watts per set / 180 watts each RMS Rated Power: 100 watts per set / 50 watts each side MB Quart ratings are very strictly tested - All ratings are true ratings Polypropylene cone woofer Rugged stamped metal basket 1.25" titanium dome tweeters 1" titanium dome super tweeters Spider with woven tinsel leads Internal crossover + or - 3 dB 12 dB internal crossover slope Rubber surround Includes installation hardware and mounting templates 4 ohms impedance Top-mount depth: 3.4" Frequency Response: 40 - 32,000 Hz Sensitivity: 90 dB

Visit Store Now !!

Detail Products

• Clarion EQS746 1/2 DIN Graphic Equalizer with Built-in Crossover

Detail Reviews

Sep 09, 2011 02:26:04

DB Drive E6 6.5-Inch Component Speaker

DB Drive E6 6.5-Inch Component Speaker Reviews

Other Picture

DB Drive E6 6.5-Inch Component Speaker Feature

• 6.5-Inch
• Pair
• 175W Max
• 75W Nominal Power
• Sensitivity: 87 Db @ 1W/1 M

DB Drive E6 6.5-Inch Component Speaker

Visit Store Now !!

Detail Products

Detail Reviews

Sep 08, 2011 04:07:04

PowerBass L-4602x 4 X 6-Inch Coaxial 2-Way Speaker Set (Pair)

PowerBass L-4602x 4 X 6-Inch Coaxial 2-Way Speaker Set (Pair) Reviews

Other Picture

PowerBass L-4602x 4 X 6-Inch Coaxial 2-Way Speaker Set (Pair) Feature

• Metal ring included for mounting standard 4x6" US or metric locations
• Woofer featuresZirconium Titanium enhanced poly cone
• 70Hz - 21Hkz Frequency response 3-ohm nominal impedance 87db efficiency
• 120 Watts peak power handling
• Butyl rubber surround

PowerBass L-4602x 4x6" Coaxial 2-Way speakers feature advanced injection Zirconium Polypropylene Z2 cone, and are engineered for today's progressive music. The L-4602X "L" series 4x6" mount speakers will bring your favorite songs to life. Our second generation Z2 cone is lightweight, yet it is capable of providing amazing low and tight bass. A low profile 0.75" aluminum hard dome tweeter delivers high end sizzle, while our proprietary Sound Expander Lens (SEL) increses the tweeters dispersion. The 3-ohm system impedance provides extra efficiency and improved bass for louder sound can be powered by either a factory or aftermarket radio and is fully compatible with all 4-ohm systems.

Visit Store Now !!

Detail Products

Detail Reviews

Sep 07, 2011 01:20:04

Cadence Acoustics ZRS55-KS 120-Watt Peak Low Profile 2-Way Speaker Component Kit

Cadence Acoustics ZRS55-KS 120-Watt Peak Low Profile 2-Way Speaker Component Kit Reviews

Other Picture

Cadence Acoustics ZRS55-KS 120-Watt Peak Low Profile 2-Way Speaker Component Kit Feature

• Cadence ZRS55KS 5.25-inch 4 Ohm Low Profile 2-Way Speaker Component Kit
• Power Handling: 60W RMS/120W Peak
• Frequency Response: 90Hz ? 22 kHz
• Sensitivity: 92dB @ 1w/m
• Mounting Depth: 1.90-inch
• Frequency Response: 90Hz - 22 kHz

The new ZRS Series is unmistakably Cadence. Professional studio grade quality means your system will deliver dynamic sound with natural transparency, unmatched impact, and perfect imaging. The ZRS55KS is a complete 5.25-Inch two-way speaker component kit. They are a low profile, super slim upgrade speaker. The ZRS55KS has a Kevlar fiber composite pulp cone with a butyl rubber surround and a molded acrylic phase plug bullet for extended range response. It contains a high power Kapton voice coil and an internal magnet motor structure. The ZRS55KS includes silk dome neodymium tweeters with Ferro-fluid tweeter voice coil cooling. The tweeter include flush, angle, and surface mounts and the kit comes with 12dB impedance matching two-way crossover networks. The ZRS55KS has a power handling of 60 Watts RMS with a 120 Watt Peak. The frequency response is 90Hz - 22 kHz with a sensitivity of 92dB @ 1w/1m SPL. The magnet size of the ZRS55KS is 8oz and the structure weight is 16oz. The ZRS55KS has a mounting depth of 1.90-inch. Product comes with a two (2) year warranty.

Visit Store Now !!

Detail Products

Detail Reviews

Sep 06, 2011 00:45:03

Boston Acoustics NX 87 - Car speaker - 2-way - coaxial - 5" x 7"

Boston Acoustics NX 87 - Car speaker - 2-way - coaxial - 5" x 7" Reviews

Other Picture

Boston Acoustics introduces the NX Car Coaxial speakers. NX was designed from the ground up to offer maximum performance while maintaining a low-profile design. Using many technologies found in the high-end car and home audio speakers (Kortec, AMD, and neodymium) while focusing on a speaker that can be installed in the tightest of locations, the NX coaxials truly provide drop-in high performance.Boston Acoustics reaffirms its dedication to the 5x7-inch category with the NX 87. This size is a direct drop-in for many of the most popular vehicles on the road.

Visit Store Now !!

Detail Products

Detail Reviews

Sep 04, 2011 05:28:13

Brand New Boston Acoustics Se85 5x7" 2 Way Se Series Pair of Car Speakers Totalling 240 Watt Peak / 70 Watt RMS

Brand New Boston Acoustics Se85 5x7" 2 Way Se Series Pair of Car Speakers Totalling 240 Watt Peak / 70 Watt RMS Reviews

Other Picture

Brand New Boston Acoustics Se85 5x7" 2 Way Se Series Pair of Car Speakers Totalling 240 Watt Peak / 70 Watt RMS Feature

• 5" x 7" SE Series 2-Way Car Speakers
• Copolymer woofer cone
• Butyl rubber surround
• 3/4" Type-S3 carbon injected polymer soft dome tweeter
• Ferrofluid cooling for increased power handling

Brand New Boston Acoustics SE85 5X7" 2 Way SE Series Pair Of Car Speakers Totalling 240 Watt Peak / 70 Watt RMS Features: 5" x 7" SE Series 2-Way Car Speakers Copolymer woofer cone Butyl rubber surround 3/4" Type-S3 carbon injected polymer soft dome tweeter Ferrofluid cooling for increased power handling CATB (Contoured Asymmetrical Tweeter Baffle) improves off-axis response Neodymium tweeter motor structure Separable and dockable crossovers Metal mesh grille for optimum speaker protection

Visit Store Now !!

Detail Products

Detail Reviews

Sep 02, 2011 17:01:04

PYLE PLMR65C 250 Watts 6.5-Inch 2-Way Custom Marine Component System

PYLE PLMR65C 250 Watts 6.5-Inch 2-Way Custom Marine Component System Reviews

Other Picture

PYLE PLMR65C 250 Watts 6.5-Inch 2-Way Custom Marine Component System Feature

• This Custom Kit Contains: - 2 Way Attachable Grille Design - 4 Ohm Impedance - Flush and Angled Surface Mount Capabilites - Accessories
• One Pair 6.5'' Mid Bass Speaker - 1'' High Temperature Kapton Voice Coil - Sensitivity: 91dB - Impedance: 4 Ohm - Includes Grills Wires Installation Hardware
• 6.5'' High Quality White Polypropylene Cone - 40 Oz Magnet Structure - Mounting Depth: 2.60" - One Pair Passive Crossover Network: - Wiring Kit
• Santoprene Surround - 250 Watts Rated Peak Power - One Pair 1" Tweeter: - Two - Way Passive Crossover - Wiring Diagram Template
• Water-Resistant Construction - Frequency Response: 60Hz-20K Hz - 1'' Neodymium Dome Tweeter - Impedance: 4 Ohm

This Pyle Hydra kit has everything you need to get started on a high quality marine sound system for your boat thanks to the water-resistant construction. It includes one pair of 6.5” mid-bass speakers, one pair of 1” tweeters, one pair of passive crossover network devices, grills, wires, and installation hardware. The mid-bass speakers are powered by a 6.5” polypropylene cone and 1” high-temperature Kapton voice coil pumping 250 watts peak power. The dome tweeters have neodymium magnets for sweet highs. Use the passive crossover network to distribute your amplifier’s output between the two sets of speakers for an accurate, distortion-free sound. Includes a wiring kit and wiring diagram template.

Visit Store Now !!

Detail Products

• PYLE PLMRA420 4-Channel 1,000-Watt Waterproof Marine Bridgeable MOSFET Amplifier
• PYLE PLMRX67 250-Watt 6.5-Inch 2-Way Marine Speakers
• PYLE PLMRX69 300 Watts 6-Inch x 9-Inch 2 Way Marine Speakers
• PYLE PLMRAKT8 Marine Grade 8 Gauge Amplifier Installation Kit
• PYLE PLMRA620 6 Channel 2000 Watt Waterproof Marine Bridgeable Mosfet Amplifier

Detail Reviews

Sep 01, 2011 10:43:10

PowerBass L-6705x 6.5-Inch to 6.75-Inch Coaxial 2-Way Speaker System (Pair)

PowerBass L-6705x 6.5-Inch to 6.75-Inch Coaxial 2-Way Speaker System (Pair) Reviews

Other Picture

PowerBass L-6705x 6.5-Inch to 6.75-Inch Coaxial 2-Way Speaker System (Pair) Feature

• 180watts peake power handling 3-ohm nominal impedance 89db efficiency 62Hz - 21Khz frequency response
• Butyl rubber surround Advanced injection Zirconium Polypropylene Z2 cone
• Kit includes speaker wire mounting hardware application guide PowerBass decal
• Proprietary Sound Expander Lens increases tweeters dispersion
• 3-Ohm system impedance for extra efficiency and improved bass

The PowerBass L-6705x 6.5 Inch to 6.75 Inch 2-Way Coaxial speakers are engineered for today's progressive music. The L-6705x InchL Inch series mount speakers will bring your favorite songs to life. Our second generation Z2 cone is lightweight, yet it is capable of providing amazing low and tight bass. A low profile 0.75 Inch aluminum hard dome tweeter delivers high end sizzle, while our proprietary Sound Expander Lens (SEL) increases the tweeters dispersion. The 3-ohm system impedance provides extra efficiency and improved bass for louder sound can be powered by either a factory or aftermarket radio and is fully compatible with all 4-ohm systems.

Visit Store Now !!

Detail Products

Detail Reviews

Aug 30, 2011 23:40:19

Clarion SRQ1621S 6-1/2" 2-Way Component Speaker System

Clarion SRQ1621S 6-1/2" 2-Way Component Speaker System Reviews

Other Picture

Clarion SRQ1621S 6-1/2" 2-Way Component Speaker System Feature

• 280 Watts Maximum Music Power
• 6-1/2" PMI-PP Cone Woofer
• 3/4" Pure Soft Dome Tweeter with Neodymium Magnet
• 2-Way Mounting Tweeter (Variable Angle / Surface Mounting)
• Powerful Strontium Magnet for Dynamic Bass Response

Clarion's SRQ1621S component system handles 280 watts of music power in a 6-1/2-inch, two-way component package with two-way mounting tweeter (variable angle/surface mount). Grille and mesh included.

A perfect solution for your acoustic environment. Click to enlarge.

Frequency response.

Speaker dimensions.

6-1/2-Inch PMI-PP Cone Woofer
Polymethacrylimide provides lightweight strength for great performance.

Water-Resistant Cones
Water-resistant cones prevent sound-quality deterioration caused by moisture. Door mounting is possible without further protection.

Rubber Surrounds
The rolled edge of the diaphragm provides superior response, while its butyl material is highly durable and moisture resistant. The result is a special rubber surround that cuts distortion and further improves linearity.

Powerful Strontium Magnet for Dynamic Bass Response
A high-conductivity magnet is used in Clarion's speaker systems to obtain an airgap magnetic flux density significantly higher than that obtained from ferrite magnets. Combining this magnet with the heat-resistant voice coil results in speakers that are able to deliver powerful playback at large inputs with improved damping while maintaining the integrity of the digital source.

Rear-Vented Pole Piece
To prevent pressure from building up inside the center cap and causing increased amplitude distortion, a vent is provided on the rear of the pole piece, resulting in completely smooth cone movement, which contributes to the open, airy sound of the speakers.

3/4-Inch Pure Soft Dome Tweeter with Neodymium Magnet
For superb sound reproduction, Clarion's ProAudio tweeters utilizes a Dual Neodymium magnet, which boasts extremely high magnetic energy--approximately 10 times that of typical ferrite magnets. With a magnetic influx density that far surpasses conventional speakers, the neodymium magnet also reduces magnetic distortion and touts high energy efficiency.

Two-Way Mounting Tweeter (Variable Angle / Surface Mounting)
Unlike conventional 2-way speakers, these feature a tweeter that is adjustable for angle and can be aimed for precise high frequency imaging. When coaxial speakers are mounted in the most common door locations, the high frequencies are beamed at the driver and passenger's feet, reducing high frequency response and spatial imaging. By changing the angle so that the tweeter sends high frequencies to the listener's ears, high frequency response is increased, and spatial imaging is dramatically improved.

In-Line Crossover Network
Allows speaker output level adjustment in three steps (0dB/-6dB/-12dB).

Lead-Free Solder
Solder used in product manufacturing is lead-free to help protect the environment.

SRQ1621S Specs

• Max. Input (W): 280
• Efficiency (dB/W/m): 91
• Frequency Response (Hz): 30~35k
• Mounting Depth (inch): 2-1/4

What's in the Box
Clarion SRQ1621S 6-1/2" 2-Way Component Speaker System Clarion's SRQ1621S component system handles 280 watts of music power in a 6-1/2-inch, two-way component package with two-way mounting tweeter (variable angle/surface mount). Grille and mesh included.

Visit Store Now !!

Detail Products

• Clarion SRQ6932R 6" X 9" 3-Way Speaker System
• Clarion CZ500 In-Dash CD/MP3/WMA/AAC Receiver with USB and Bluetooth
• Clarion SRQ1631R 6-1/2" 3-Way Speaker System
• Clarion VX400 6.5-Inch In-Dash Double-DIN Touchscreen DVD/CD/MP3/USB Receiver with Bluetooth
• Boss KIT-2 Complete 8 Gauge Amplifier Installation Kit

Detail Reviews

Aug 29, 2011 06:39:12